| Cartridge parameters document |
|
| Cartridge name: E380 |
|
| Cartridge capacity: 350ml |
|
| Ink type: Water-based ink |
|
| Color: Monochrome, default black or blue |
|
| Applicable printer model: KAEMI E380 large ink cartridge Plotter |
|
| Main performance parameters: |
|
| - Viscosity: 2.5-3.5cp, ensuring good flow performance to suit the
printer's inkjet system. |
| - Surface tension: 35mN-45mN/m, which helps to form stable droplets
and guarantee print quality. |
| - pH value: Generally between 7-12, usually about 6.5, neutral to
prevent corrosion of the printer nozzle. |
| - Conductivity: reflects the level of salt content, salt content is
usually not more than 0.5%, to avoid the formation of
crystallization in the nozzle. |
| - Dispersant: contains surfactants that can improve the physical
properties of the ink surface, enhance the affinity and wettability
of the ink and the ink cartridge sponge. |
|
| Shelf life: Generally two years |
|
| Storage conditions: |
|
| - Sealed storage to prevent ink volatilization or contamination. |
| - Avoid direct sunlight to avoid affecting ink performance. |
| - Suitable for storage at room temperature, too high or too low
temperature may have adverse effects on the ink. |
|
| Printing effect features: |
|
| - Bright colors, high saturation, capable of presenting clear,
realistic images and text. |
| - With good light resistance and water resistance, printed works
can be maintained for a long time under certain conditions without
fading. |
|
| Note: |
|
| - Do not tear the outer packaging and stoma seal of the cartridge
before it is installed on the machine. |
| - After the cartridge is unsealed, install it on the printer as
soon as possible, otherwise it may cause ink leakage or no color
spray. |
| - When installing the ink cartridge, remove the stomatal seal
according to the instructions in the printer manual, but do not
remove other seals at will to avoid ink leakage. |
| - Usually clean the print head 3 times each time you install a new
cartridge (please clean the print head at least once). |
| - When any cartridge is out of ink or not installed, the printer
may not work properly even if there is ink in the other cartridges. |
| - Once the new cartridge is installed, do not remove it before
replacing it. Do not open the cartridge protection clip unless you
want to replace the cartridge, otherwise the cartridge may not be
used again. |
| - Do not reach into the printer or touch the cartridge while the
printer is working. |
| - When you have doubts about the quality of the ink cartridge and
remove the unused ink cartridge from the printer, please seal the
bottom ink jet with transparent tape, seal it with a plastic bag,
and give it to the dealer at the place of purchase for the
manufacturer to test and determine the quality of the ink
cartridge. |
| - Do not use ink cartridges past their expiration date. |
